A replacement King Cobra screen protector is compatible only when its fit and construction match the shaker deck and the screen assembly it is intended to protect. Do not select a part by the “King Cobra” name alone: confirm the shaker configuration, screen dimensions, attachment or tensioning method, and the protector’s position in the assembly. In solids-control applications, “screen protector” may refer to a protective layer or accessory rather than the primary screening panel, so confirm the term and part function with your equipment supplier before ordering.
If you want to learn more, please visit our website.
This guide explains what to check before replacement, how to compare options, and what information to send a supplier. At Yuanpeng, we manufacture wire mesh products and can review project requirements to help buyers specify a suitable screen-related solution; final fit should be confirmed against the equipment and screen details for your application.
This guide is for drilling contractors, solids-control teams, maintenance departments, equipment distributors, and procurement professionals sourcing replacement screen-related parts for King Cobra shaker installations. It is useful when an existing component is worn, damaged, missing, or difficult to identify. It can also help buyers compare quotations that use different product descriptions.
The term “King Cobra” may be used in equipment and aftermarket discussions, but it does not by itself identify every screen specification. Equipment configuration, deck location, and component design can affect fit. Treat the name as a starting point for identification, not as a substitute for checking the part.
A screen protector is generally understood as a part or layer intended to protect a screen assembly from wear or damage, but suppliers may use the term differently. In a shaker-screen order, the requested item could instead be the screening panel itself, a support layer, or a related accessory. These products are not automatically interchangeable, and confusing them can lead to a part that does not fit or perform the requested role.
Before ordering, compare the proposed part with the one being replaced and ask the supplier to state its function in writing. Clarify whether it contacts the drilling fluid, sits above or below another layer, or attaches independently to the shaker. If the original product label or drawing is available, share it with the supplier.
Screen-related products may differ in mesh material, support construction, edge design, and attachment features. Wire mesh is one possible construction, while some assemblies incorporate a supporting frame or other layers; the suitable arrangement depends on the original design and the application. Do not assume that a material or construction described as an upgrade will fit an existing deck.
For wire mesh components, buyers should clarify the alloy or material grade where specified, the mesh or opening requirement, and the support arrangement. Where a protector is a separate overlay, confirm that its openings, edges, and installation do not interfere with the underlying screen. The supplier should distinguish stated product specifications from assumptions made during quotation.
These measurements are a documentation checklist, not universal King Cobra product dimensions. Actual dimensions and tolerances must come from the equipment documentation, the original part, or supplier confirmation. A visually similar screen can still differ in fit, attachment, or screening characteristics.
Compatibility also depends on what the screen assembly must do in service. Describe the drilling-fluid conditions, the type of solids-control duty, and any recurring issue such as premature wear, damage, or poor fit. These details help a supplier assess whether the request is for a direct replacement or whether the underlying specification should be reviewed.
You will get efficient and thoughtful service from Yuanpeng.
Where performance is specified using a recognized screen designation, provide the exact designation and identify its source. Do not convert a mesh count or opening estimate into a performance claim without confirming the test method and product construction. If the original screen has no readable label, photographs and a sample can support identification, but they may not establish every technical property.
Build a simple comparison before approving an order: part function, dimensions, attachment, material, mesh or opening, and quantity. Ask the supplier to identify any differences from the original part and explain whether they affect installation or use. For customized products, request a drawing or written specification for approval before production.
| Check | Information to provide | Why it matters |
|---|---|---|
| Equipment | Model identification, configuration, deck position | Helps narrow the required fit and application. |
| Dimensions | Length, width, and thickness in mm | Supports comparison with the installed part and drawing. |
| Construction | Mesh, support, frame, edge, and attachment details | Helps distinguish a protector from a complete screen or another component. |
| Operating context | Duty, fluid conditions, known wear or failure | Allows the supplier to assess whether the specification suits the intended use. |
Pricing can depend on material, dimensions, construction, customization, order quantity, and packaging requirements. Minimum order quantities (MOQ) and lead times are supplier- and specification-dependent, so they should be confirmed in the quotation rather than assumed from a product category. For a replacement order, ask whether the quoted item is made to an existing specification or requires new tooling, sampling, or drawing approval.
To compare offers fairly, confirm that each quotation covers the same product function and specification. Ask suppliers to state the quoted material, dimensions, mesh or opening details where applicable, quantity, packaging, and delivery terms. If an urgent replacement is needed, share the required delivery date and ask the supplier to confirm feasibility before placing the order.
A suitable supplier should be able to discuss the product specification clearly and identify information that remains unconfirmed. Ask whether they can review drawings or samples, provide a specification for approval, and explain how dimensional and construction requirements will be recorded. For customized wire mesh products, clarify what inspection information is available for the order and whether deviations will be communicated before shipment.
Also check communication and order control. A written confirmation should identify the part being supplied, the agreed specification, quantity, packaging, and delivery expectations. Avoid relying on broad claims such as “fits all King Cobra units” unless the supplier can demonstrate how the statement applies to your exact configuration.
Yuanpeng supplies wire mesh products and can review the information you provide for a King Cobra screen-related replacement inquiry. Send the equipment and deck details, measurements, photos, known mesh or material requirements, quantity, and operating context. If you are unsure whether the component is a protector or a complete screen, include images of the installed assembly and the removed part so the request can be clarified.
We recommend confirming the specification and any custom drawing before production. This process helps align the quotation with the intended part and gives your maintenance or procurement team a clear record for review. Final compatibility should be verified against your equipment documentation and installation requirements.
A compatible King Cobra screen protector cannot be identified reliably from the equipment name alone. Confirm the component’s function, shaker configuration, dimensions in mm, attachment method, and material or mesh requirements before ordering. These checks help distinguish a true replacement from a similar-looking part that may not match the assembly.
Your next step is to collect the existing part’s label or drawing, record its measurements, and photograph its edges and installation position. Send that information with your quantity and delivery needs to Yuanpeng for a specification review and quotation. If any detail is unknown, mark it as unconfirmed so the supplier can help identify what needs verification before production.
Want more information on King Cobra Screen Protector? Feel free to contact us.